Common Carpet Cleaning Service Techniques

The best way to clean your carpet is by choosing the method that fits your needs read full report. Even though you can care for your carpets through regular vacuuming and quick stain treatment, it is best to invest in a deeper cleaning process. It will keep your floors looking clean and fresh.

You can use these methods to clean your carpets.

Hot Water

The method is also called steam cleaning. The machine sprays the hot solution of detergent on the surface. It immediately vacuums up the solution. Professional companies will be very cautious about the amount of water used. In the event that there is too little water, it is possible that the padding below will get wet. This can cause mold and mildew problems. If your detergent is not properly removed or too strong, it can attract dirt.

This method takes longer than other methods to dry. If you use air conditioning, fans or open the windows, it will dry faster.

Drying or foaming off the extracting

Powdered cleaners are used for the dry extraction technique. Special machines brush the powder into the fabric. The dirt and dust can be removed from the fabric using a vacuum. Spraying the stain first before applying the chemical is a common practice. Do not forget to vacuum the powder. You could find it on your clothes or shoes. This is the most popular choice, as it does not need to be dried.

The foam extraction process is similar to the hot water method. The fabric is applied with a dry foam created by the air compressor. A rotating cylindrical brush moves foam through fibers. After the dirt or dust is bonded with foam, it can be cleaned using a rotating cylindrical bristle. Before and after you use this technique, make sure to thoroughly vacuum your surface. Another option which takes longer for it to dry.

Rotary Shampoo

The rotating brushes of a machine allow you to inject a cleaning product into the fibers. This will result in a foamy solution that is dirt-filled and can be cleaned by wet vacuuming. This process is discouraged by many carpet manufacturers due to possible damage caused to carpet fibers from brushes. As this is a wet process as well, the drying times can be longer. You may find that the surface shrinks or dries too quickly. This can cause shrinkage as well as an unpleasant odor.

Absorbent Pad

The method of using an absorbent pad involves spraying a solution on the surface. Wait for the chemicals to penetrate the fibers of the fabric and bring dirt to the top. It is then necessary to use a machine equipped with a large, absorbent spinning plate in order to remove the chemicals. The machine looks like a floor buff. This method should only be used by professionals. This method can cause carpet to pucker.

A carpet cleaner may use multiple methods. Each method was used for many years. These techniques are capable of working on any surface, as long they are used correctly. You should discuss your requirements as widely as possible.

Carpet Cleaning Sydney
38 Canoon Rd, South Turramurra NSW 2074, Australia
0413 194 766